不銹鋼電梯門套痕跡怎么修復?
1、用紙巾蘸酒精(工業酒精,如果不使用醫用酒精)擦拭,然后將不銹鋼電梯門蓋的保護膜擦幾遍,清洗干凈。
1. Wipe with paper towel dipped in alcohol (industrial alcohol, if medical alcohol is not used), then wipe the protective film of stainless steel elevator door cover several times and clean it.
2. 使用指甲油去除劑。使用方法同酒精、丙酮。效果也很好。只要能去除指甲油,無論是質量好還是一般,都不需要指甲油。
2. use nail polish remover. The use method is the same as that of alcohol and acetone. The effect is also very good. As long as nail polish can be removed, no matter whether it is of good quality or general, nail polish is not required.
3. 使用丙酮。方法和上面一樣。用量少,修復效果好。更妙的是,它可以快速輕松地去除這些殘留的膠體,這比噴灑精華更好。
3. Use acetone. The method is the same as above. Less dosage and good repair effect. What's more, it can quickly and easily remove these residual colloids, which is better than spraying essence.
以上兩種方法都是溶劑,效果更好。
The above two methods are solvents, and the effect is better.
4. 使用香蕉水。它是一種用于去除油漆的工業劑。也很容易買到(油漆哪里有賣)。方法同乙醇、丙酮。用熱毛巾擦,用刀片刮,再用橡皮擦擦。它非常干凈。家里有香脂。這是一件好事。用它很容易你的問題。
4. Use banana water. It is an industrial agent used to remove paint. It's also easy to buy (where can I sell paint). The method is the same as that of ethanol and acetone. Wipe with a hot towel, scrape with a blade, and then wipe with an eraser. It's very clean. There is balm at home. This is a good thing. It's easy to solve your problem with it.
上邊的就是小編為大家整理的相關信息,更多的精彩內容請點擊我們的網站:拉絲不銹鋼電梯http://vgjf.cn關注獲取更多精彩內容.
Above is the relevant information compiled by Xiaobian for you. For more wonderful content, please click our website: stainless steel elevator door pocket http://vgjf.cn Follow for more exciting content